LEXUS CT200H 5 Door Rear Bumper Protection 2014>17 (SKU:06-CT200H)

A$49.90 A$99.00

LEXUS CT200H 5 Door Rear Bumper Protection 1 Pce set made from high quality Black ABS and very easy to install with the 3M backing tape included .(March 2014 -Oct 2017

Dramatically improves the appearance of your LEXUS as well as hiding existing scratches

 A practical, simple solution to cover scuffed and scratched bumper tops

 Hides old paint scratches, prevents new ones and avoids costly bumper repairs!

 Quick and easy DIY fit using double-sided self-adhesive tape

Individually tailored – moulded in recyclable ABS plastic

 Looks like an original factory fitted product

 Possibly the most practical accessory you can fit to your car

 New models being added every month

 Approved by many vehicle manufacturers

Designed & manufactured in the U.K. by RGM

RGM ABS REARGUARD RBP728 – CT200H (5 Door) (3.2014>10.2017)

Just make sure the surface area is 100% clean and silicone free before removing the backing tape ,then place the trim in the pre marked position and press down firmly with a soft cloth and finally remove the clear plastic protective cover

Best installed between 18-30 degrees or warm up the fitting location with a hair dryer and press down firmly for a far better adhesive bond

3 years Australian Warranty

LEXUS CT200H 5 Door Rear Bumper Protection 1 Pce set made from high quality Black ABS and very easy to install with the 3M backing tape included .(March 2014 -Oct 2017

Dramatically improves the appearance of your LEXUS as well as hiding existing scratches

 A practical, simple solution to cover scuffed and scratched bumper tops

 Hides old paint scratches, prevents new ones and avoids costly bumper repairs!

 Quick and easy DIY fit using double-sided self-adhesive tape

Individually tailored – moulded in recyclable ABS plastic

 Looks like an original factory fitted product

 Possibly the most practical accessory you can fit to your car

 New models being added every month

 Approved by many vehicle manufacturers

Designed & manufactured in the U.K. by RGM

RGM ABS REARGUARD RBP728 – CT200H (5 Door) (3.2014>10.2017)

Just make sure the surface area is 100% clean and silicone free before removing the backing tape ,then place the trim in the pre marked position and press down firmly with a soft cloth and finally remove the clear plastic protective cover

Best installed between 18-30 degrees or warm up the fitting location with a hair dryer and press down firmly for a far better adhesive bond

3 years Australian Warranty